UrbanTrapeze® Drop-Ceiling Hanging Cable Sign Holder Kit

Description

Hang signs and other ceiling displays from drop-ceilings with our UrbanTrapeze® Hanging Cable Kit.  Easy installation allows for focused placement of your sign which improves the visibility of your message or display.

Ideal for use in a variety of venues including retail, galleries, commercial spaces, museums and churches.

The In-Line Sign Panel Connector attaches to a variety of rigid sign material up to .157 in. ( 4mm)  thick including glass, acrylic, Sintra or PVC and thin FomeCor.

Steel cable with ball end threads through the In-Line Sign Panel Connector to insert into the UrbanTrapeze In-Line Drop-Ceiling Cable Connector attached to standard 15/16 in. drop ceiling T-bar grid.

The built-in UrbanTrapeze cable adjuster/brake allows the user to adjust the height and level the sign with the push of a push button. This is a much easier method than a device requiring a key.

This link takes you to our How-To Install flyer for this kit.

Kit contains two each of the products shown below – enough to hang one sign.

Kit Contents

UrbanTrapeze™ In-Line Drop Ceiling Cable Connector – 2/kit

• Twist-on to attach standard 15/16″ drop ceiling T-bar grid.
• Accepts up to 1/16 in. (1.5mm) galvanized uncoated steel aircraft cable
• Holds up to 30 lbs.
• Integrated UrbanTrapeze cable lock/adjuster holds the cable securely in place
• Can be purchased separately. Part #63-10005

In-Line Sign Panel  Connector – 2/kit

• Aesthetically pleasing Connector attaches to top edge of sign material up to 4mm (.157 in.) thick
• Compatible sign panels include PVC, Sintra,glass, acrylic and thin foam board
• Plastic tipped set screws holds sign material in place. Tighten with included hex key
• Aluminum with silver powder coat
• Can be purchased separately. Part #60-20100

Steel Cable with Ball End – 2/kit

• Included ball end (.194″ dia.) keeps cable inside the In-Line Connector
• Cable is 1/16 in. dia. (1.5mm) x 78 inches (2m) long
• Cable easily trimmed with cable cutters (not included)
• Opposite end of cable is fuse cut to prevent fraying and for easy insertion in the Drop Ceiling Connector
• Can be purchased separately. Part #62-13000

Kit part #63-20100