Swage Tool & Aluminum Crimp Sleeves

Crimping aluminum sleeves takes a swage tool, and this is where you’ll find both. Our hand swage tool presses aluminum cable crimp sleeves onto wire rope and galvanized steel cable to make secure loop ends or join two cable lengths. Crimp sleeves are also called “sleeves” or “ferrules.”

The hourglass (duplex) sleeve shape gives the smoothest swage. Don’t swage over coated cable; it severely reduces holding power.

Want to skip crimping altogether? The UrbanTrapeze cable adjuster grips and adjusts steel cable by hand, no tool needed. See how the two compare in UrbanTrapeze vs. cable crimp sleeves.

Buy below or Contact Us if you have questions!

Showing the single result

Cable Crimps and Wire Rope Sleeves: Frequently Asked Questions

What is a cable crimp used for?

A cable crimp is used to securely fasten the ends of wire rope or galvanized steel cable, often to form a loop or join two cable lengths together. Our aluminum cable crimp sleeves offer a strong hold, though our Urban Trapeze system provides a faster, tool-free alternative — see what the difference is here.

What is the difference between a crimp sleeve and a ferrule?

A crimp sleeve and a ferrule are essentially the same component. Both are designed to be swaged onto wire rope to create a secure connection. The terms are used interchangeably in the cable hardware industry.

What tool do I need for crimping wire rope sleeves?

To install aluminum wire rope sleeves properly, you need a dedicated crimp sleeve swage tool. This ensures even compression and a safe, long-lasting hold.

Can I crimp sleeves over vinyl-coated cable?

We don’t recommend it. Swaging over coated cable severely reduces holding power. Use bare galvanized steel cable.

Do I need a special tool to crimp aluminum sleeves?

Yes. Sleeves must be crimped with a crimp sleeve swage tool. Pliers won’t compress the sleeve evenly, and the loop can slip under load.

Can I use a crimp sleeve on coated cable?

It is not recommended to use a crimp sleeve on coated cable because swaging over the coating reduces the holding power. For coated cable, consider solutions like the Urban Trapeze that do not require crimping — see the comparison here.