FlatHat™: Hang Signs from Tall Ceilings (>27 ft.)
Meet Taller Ceilings Halfway
FlatHat™ Creates A Connection Point You Can Reach
Ceilings in commercial spaces taller than 27 feet are simply out of reach to someone standing on the ground. Unless you’re comfortable climbing a tall ladder or renting a lift, your ceilings probably stay bare. Understandably, you don’t spend the time (or danger) of having employees hang signs/banners from your tall ceilings… Until Now.
Introducing FlatHat™: The Solution for Hanging Signs from Tall Ceilings Over 27 Feet Tall
The FlatHat Receiver, our innovative sign hanging hardware for high ceilings, makes it much easier to hang signs without a ladder or lift from taller interior ceilings. FlatHat Receivers are attached to the ceiling with steel cable and positioned to hang about 20 feet above the floor.
This one-time installation creates a reachable fixed connection point that receives a ceiling magnet (ex. Round ClikMagnet™), which is connected to the sign with our LoopLine™ cord, and raised into position with Clik-Clik’s Standard MagPole™.
Ceiling Outfitters® has everything you need to implement FlatHat, making sign installation on Taller Ceilings SAFE, FAST and SIMPLE.
To install the Receivers, download our FlatHat Brochure (PDF) which guides you through the installation process.
The required components are available below.
For ceilings shorter than 27 feet, there’s a simple magnetic sign hanging solution called Clik-Clik that you should check out.
Showing all 12 results
FlatHat Receiver (20/Bag)Product ID: 10-95500
FlatHat Receiver (20/Bag)
Round Blue ClikMagnet (10/Bag) 10 lb. pullProduct ID: 10-95570
Round Blue ClikMagnet (10/Bag) 10 lb. pull
Round Red ClikMagnet (10/Bag) 20 lb. pullProduct ID: 10-95600
Round Red ClikMagnet (10/Bag) 20 lb. pull
LoopLine Cord (82 Feet)Product ID: 10-70133
LoopLine Cord (82 Feet)
LoopLine Cord (328 Feet)Product ID: 10-70123
LoopLine Cord (328 Feet)
Dual MagMover (24-Inch, Adjustable)Product ID: 10-12402
Dual MagMover (24-Inch, Adjustable)
Standard MagPoleProduct ID: 10-18000
ID: 62-10010$19.95 – $92.95
Steel Cable (1/16 inch)Product ID: 62-10010
Steel Cable (1/16 inch)
FELCO Steel Cable CutterProduct ID: 62-12007
FELCO Steel Cable Cutter
ID: 64-11016$10.00 – $19.00
E-Z Aluminum Crimp for Steel Cable (100/Bag)Product ID: 64-11016
E-Z Aluminum Crimp for Steel Cable (100/Bag)
UrbanTrapeze 1.5 Aircraft Wire Cable Stop Clamp Adjuster Gripper LooperProduct ID: 63-10015
UrbanTrapeze 1.5 Aircraft Wire Cable Stop Clamp Adjuster Gripper Looper
Three-Cavity Hand Swager/Crimper 1.5 for 1/16 Inch CableProduct ID: 62-12003
Three-Cavity Hand Swager/Crimper 1.5 for 1/16 Inch Cable
Frequently Asked Questions
- What's the best way to hang signage on a tall ceiling (>27ft)
Meet the ceiling halfway with FlatHat™!
FlatHat is the only system designed specifically for hanging signage from taller ceilings making it SAFER, FASTER and simpler to install signage. Receivers are attached to the ceiling with steel cable and positioned to hang about 20 feet above the floor.
- How to get the most value out of event signage in large places
For events at conference centers, gymnasiums, stadiums and large meeting halls, the best way to present your signage would be from a ceiling!
- Save room for foot traffic
- Increase visibility
Despite the perks, for tall ceilings this can be a challenge. That’s why we recommended safely hanging signage on high ceilings with FlatHat system